Nyobolt, the developer of ultra-fast charging niobium-based battery technology (earlier post) revealed the first running Nyobolt EV prototype. (Earlier post.) Designed and engineered with CALLUM, the Nyobolt EV will be used to both validate the company’s battery performance in a high-performance environment, as well as allow car makers to witness an elevated customer experience where inconvenient charging downtime is thing of the past.
Founded in 2019, Cambridge-based Nyobolt has leveraged its next-generation patented carbon and metal oxide anode materials, innovative low impedance cell design, integrated power electronics and software controls to create power dense battery and charging systems. These support the electrification of high-uptime industrial and automotive applications such as heavy-duty off-highway trucks, EVs, robotics and consumer devices that demand high power and quick recharge cycles.
Initial in-vehicle testing this month using 350kW (800V) DC fast chargers has confirmed that Nyobolt EV’s 50Ah 35kWh battery can be charged from 10% to 80% in four minutes 37 seconds—with a full charge enabling the prototype to achieve a range of 155 WLTP miles. That is twice the speed of most of the fastest charging vehicles today. Furthermore, as the first four minutes are at a constant current of 500A, this provides 120 miles of range after just four minutes of charging.
Nyobolt’s technology also solves the levels of degradation that typically come with supercharging lithium-ion batteries. Nyobolt’s 24.5Ah cells have already successfully completed more than 4,000 full DoD (Depth of Discharge) fast charge cycles, equating to more than 600,000 miles if used in the Nyobolt EV pack, while still retaining more than 80% battery capacity. This is many multiples higher than the warranties of much larger EV batteries on the road today.
Independent OEM testing confirmed Nyobolt 2.6Ah cells can achieve more than 4,400 cycles with a 12C charge and 1C discharge at 23°C. Crucially, the cell internal resistance rises by only 50% after 4,400 five-minute charge cycles. This is lower than the industry accepted end of life values for EV cells, which is typically twice the initial value.
Despite some OEMs showing fast charge times in the region of 15 minutes, a closer inspection reveals the charge is usually across a limited SOC region specifically chosen to limit the amount of life taken out of the cell; for instance, between 20-80%. Typically, the charge profile will only hold these peak charge levels for a short amount of the charge time. Nyobolt’s low impedance cells ensure we can offer sustainability, stretching out the battery’s usable life for up to 600,000 miles in the case of our technology demonstrator.
—Nyobolt’s co-founder and CEO, Dr Sai Shivareddy
The 35kWh battery pack in the Nyobolt EV prototype not only adds miles faster but the compact battery pack size benefits car makers and motorists, enabling energy efficient electric vehicles that are cheaper to buy and run, and crucially use fewer resources to manufacture.
While the priority use for this Nyobolt EV is showcasing and testing the battery technology, CALLUM’s team has engineered it so that low volume production—for road or track use—is possible. Nyobolt’s battery assembly plans are more advanced and could be in production at low volume within a year, ramping to 1,000 packs in 2025.
Nyobolt’s flexible manufacturing model enables volumes of up to two million cells per year. Nyobolt’s battery will also comply with the EU’s Battery Regulation requirements once in production.
The Nyobolt EV’s architecture also highlights how it could be retrofitted to existing EV platforms, bringing a step change in charge time and battery cycling life. The Nyobolt EV’s battery modules are cooled via cold plates with a water/glycol mix. The battery circuit uses an AC compressor and condenser and a battery chiller, compatible with other performance vehicles, and results in a near standard module and battery pack.
The limited heat generation—no more than 60 °C during a fast charge or a performance drive—is influenced in the main by the ultra-low impedance cell chemistry.
Nyobolt’s technology builds on a decade of battery research led by University of Cambridge battery scientists Professor Clare Grey CBE and Dr Sai Shivareddy, who had invented advanced supercapacitors. Key to Nyobolt’s ability to offer ultra-fast charging without impacting battery life is its low impedance cells that generate less heat, making it easier to manage such high-power levels during charging. Its anode materials in lithium-ion battery cells allow for a faster transfer of electrons between the anode and cathode.
Nyobolt says it is already in conversation with a further eight vehicle OEMs about adopting its technology. Alongside automotive applications, Nyobolt’s fast-charging technology is set to be deployed this year in robotics with other applications such as heavy-duty commercial vehicles seeking low downtime and high-productivity, also advancing.
Source from Green Car Congress
Disclaimer: The information set forth above is provided by greencarcongress.com independently of Alibaba.com. Alibaba.com makes no representation and warranties as to the quality and reliability of the seller and products.
